commit all

asrWordlist.txt

@@ -0,0 +1,12 @@
+version=v3.0-20191112
+#ASR(识别词条):MP3(音频):TTS(识别成功后播报的文本):UART(识别成功后串口输出信息):SCORE(识别阈值)
+[common]
+富强路站::识别成功，富强路站:55020100
+民主路站::识别成功，民主路站:55020200
+文明路站::识别成功，文明路站:55020300
+和谐路站::识别成功，和谐路站:55020400
+爱国路站::识别成功，爱国路站:55020500
+敬业路站::识别成功，敬业路站:55020600
+友善路站::识别成功，友善路站:55020700
+
+

config.ini

@@ -0,0 +1,116 @@
+version=v2.3.2-20190430
+##config 语音大脑DM6291_ASR_KIT something
+#以下的所有不同关键字对应的UART值不可重复.
+
+#started speak words.the "welcome" is necessary.开机欢迎语.such as "welcome=MP3:TTS".
+welcome=:基于Arduino的比赛围栏和标志物摧毁系统已就绪:
+ 
+#wakeup.the "wakeword" is necessary.pattern such as "wakeword=ASR:MP3:TTS:UART:SCORE::OneShot".唤醒语句.
+wakeword=小创小创小创::在呢:::
+wakeword=小创小创::在呢:::
+wakeword=小爱同学::我在:::
+wakeword=语音识别::识别中::: 
+wakeword=测试::哦:::
+
+#bake-off.the "bakeoff" is necessary.pattern such as "bakeoff=ASR:MP3:TTS:UART:SCORE".退下语句.
+bakeoff=小创关机::已关机:
+bakeoff=闭嘴吧你::好的::300
+bakeoff=没事了::再见::300
+bakeoff=再见::拜拜::300
+bakeoff=拜拜::下次见::300
+bakeoff=三友那拉::拜拜::300
+
+#exit wake play voice "exitWake=MP3:TTS:UART",唤醒时长结束后自动播报。
+exitWake=:小创竭诚为您服务:
+
+#volume up.the "volumeup" is necessary.pattern such as "volumeup=ASR:MP3:TTS:UART:SCORE".提高播放音量.
+volumeup=条大音量::音量已增加::100
+volumeup=音量条大::音量已增加::100
+volumeup=增大音量::音量已增加::100
+volumeup=音量大点::音量已增加::100
+
+#volume down.the "volumeup" is necessary.pattern such as "volumedown=ASR:MP3:TTS:UART:SCORE".降低播放音量.
+volumedown=条小音量::音量已减小::100
+volumedown=音量条小::音量已减小::100
+volumedown=小点声音::音量已减小::100
+volumedown=声音小点::音量已减小::100
+
+#语音设置录音音量,远距离／中等距离／近距离 ."volumedown=ASR:MP3:TTS:volume:SCORE".
+farrecvolume=切换到家庭模式::切换到家庭模式:75:100:
+midrecvolume=切换到厨房模式::切换到厨房模式:65:100:
+nearrecvolume=切换到卖场模式::切换到卖场模式:55:100:
+
+#语音设置打开提示音播放,"soundOn=ASR:MP3:TTS:UART:SCORE"
+soundOn=打开播放::为您打开播放::100
+
+#语音设置关闭提示音播放,"soundOff=ASR:MP3:TTS:UART:SCORE"
+soundOff=关闭播放::为您关闭播放::100
+
+#语音设置打开串口,"openASRCtrl=ASR:MP3:TTS:UART:SCORE"
+openASRCtrl=打开语音控制::打开语音控制::
+
+#语音设置关闭串口,"closeASRCtrl=ASR:MP3:TTS:UART:SCORE"
+closeASRCtrl=关闭语音控制::关闭语音控制::
+
+#train cmd from asrWordlist.txt serialPort cmd. traincmd=X1:X2:X3...
+trainCmd=0051:0052:0053:0054:0055:0056:0059
+
+#train Times parameters,select 2 or 3,Other parameters are not recommended. 
+trainTimes=2
+
+#稳态噪音快速抑制，noise resistance and higher convergence speed. nsselect=UART1:X1.mp3,UART2:X2.mp3...  最多可以配置5条.只在voiceFrom ＝ 0 时起效.
+nsselect=0051:dianji.mp3,0052:fengji.mp3,0053:hunxiang.mp3,0054:jingyin.mp3
+
+#asr result threshold.识别域值,建议设在50,如果有很强的噪音,可以设低.
+asrthreshold=50
+
+#serial port rate.串口波特率.
+serialportspeed=115200
+
+#serialport odd even none.奇偶校验.
+serialportcrc=none
+
+#serialport stop bits.停止位,1或2.
+serialportstop=1
+
+#wake continued time (second). 唤醒持续时长,单位为秒.
+waketime=30
+
+#play volume.value is 0~100,0 is default.播放音量.
+playvolume=90
+
+#record volume.value is 0~100,0 is default.录音音量.  75
+recordvolume=50
+
+#喇叭播放的最小音量值,不配置默认值最小音量值为30
+minplayvolume=50
+
+#喇叭播放的最大音量值,不配置默认值最大音量值为100,最大值至少要比最小值大10.
+maxplayvolume=100
+
+#select MP3 or TTS.'mp3'is play mp3 file,else is play TTS.选择播放音频源,如果设置播放tts,则优先播放mp3,如果没有,则播放TTS.如果设置播放mp3,则只检查播放mp3,没有则不播.
+selectplay=tts
+
+#is save voice data.0 is not save,1 is save.
+isSaveData=0
+
+#recog voice sum frame.识别录音窗口的总帧数.
+voiceFrame=45
+
+#constScole 设置固定识别分数域值,其中0值为不起效,(0,90]起效,超过90效果等于90.
+constScole=0
+
+#select voice data from.0 is not micarray read function, 1 is micarray readfunction.
+voiceFrom=0
+
+#super voice enhancement,sve. 0,not sve; 1,sve; 2,self-adaption.只在voiceFrom ＝ 1时起效.
+sve=0
+
+#micarray,Mic Distance,单位m，默认为0.055
+micDist=0.055
+
+#micarray，降噪等级denClass，默认为3
+denClass=1
+
+#asr recog vad value is 0~100 ,0 is default 。识别VAD 域值
+vadthreshold=20